WoodOwl 01005 Deep Cut Auger Bit 1/2" x 24"

WoodOwl 01005 Deep Cut Auger Bit 1/2" x 24" Review

See more picture

WoodOwl 01005 Deep Cut Auger Bit 1/2" x 24" Feature

• Teflon coated to resist heat and friction.
• Single spur cutting edge for fast and even cutting.
• Unique twist design for clean chip removal, even in the deepest cuts.
• Course lead screw for quick, on-target starts.
• Carbon Steel Construction, Heat Treated and hardened for durability.

WoodOwl's 1/2" x 24"-Deep Cut Utility Pole Augers are produced with the same high standards of engineering and manufacturing quality as are all WoodOwl products. The Deep Cutting Augers are designed for making deep, smooth cuts in: Utility Poles, Railroad Ties, Pressure-treated Lumber, Wet or Frozen Wood. Each bit is constructed of high-grade carbon steel with a course, burr-free lead screw for fast, on-target starts. A spurred lead-in cutting edge and unique twist design additionally make for fast, even drilling and clean chip removal, which are essential for making deep cuts in tough wood and in extreme environments.

Check price now

WoodOwl 05013 8 Piece 1-Inch to 2-9/16-Inch Selfeed Bit Assortment with 5-1/2-Inch Extension and lock key

WoodOwl 05013 8 Piece 1-Inch to 2-9/16-Inch Selfeed Bit Assortment with 5-1/2-Inch Extension and lock key Review

See more picture

WoodOwl 05013 8 Piece 1-Inch to 2-9/16-Inch Selfeed Bit Assortment with 5-1/2-Inch Extension and lock key Feature

• Speed of use with a self-feed design and precisely ground cutting edges that guide the bit into the work, minimizing end user force and torque.
• Long bit life without the need for frequent resharpening ensured by tightly controlled heat-treat and hardening processes.
• Quick-change 7/16ö hex shank for fast bit change-out with secure gripping surfaces in the drill chuck.
• Perfectly concentric design that elimintes bit "run out" and ensures a dimensionally correct hole.

WoodOwl's Self-Feed Wood Boring Bits are designed with precise, hardened cutting edges that hold up cut after cut. Combined with an aggessive threaded lead screw that helps draw the bit into the work, the WoodOwl Self-Feed Bit offers maximum cutting ability with minimum fatigue. The 8-piece kit includes 1", 1-1/8", 1-1/4", 1-3/8", 1-1/2", 2-1/8", 2-9/16"-Diameter bits, plus 5-1/2" extension. These WoodOwl bits feature up to 50 percent wider cutting tooth surface than competitive bits for extra stability and truer holes. Chamfered back edge for easy extraction, especially with wet wood. Machined lead screw with burr-free threads delivers a consistent feed rate. Kit includes extension bar.

Check price now

Steelex D2250 10-1/2-Inch Turning Chisel Set, 5-Piece

Steelex D2250 10-1/2-Inch Turning Chisel Set, 5-Piece Review

See more picture

Steelex D2250 10-1/2-Inch Turning Chisel Set, 5-Piece Feature

• 1/16-Inch Radius Gouge, 1/8-Inch Radium Gouge
• 3/16-Inch parting tool, 1/4-Inch spear point
• 1/4-Inch skew
• High quality carbon steel
• Hardwood handles

This 5 piece Steelex Wood Turning Chisel Set was created for fine detailed turning. It features well balanced hardwood handles and high carbon steel cutting edges to give your woodworking talent the best outcome and finished product possible.

Check price now

Xcelite XNB201 Chisel Interchangeable Knife Blade for Rough Shaping De-burring and Chiseling

Xcelite XNB201 Chisel Interchangeable Knife Blade for Rough Shaping De-burring and Chiseling Review

See more picture

Xcelite XNB201 Chisel Interchangeable Knife Blade for Rough Shaping De-burring and Chiseling Feature

• Rough shaping de-burring and chiseling
• Blades interchangeable with other similar knives
• Safely packed in transparent plastic containers
• Fits knives: XN220, XN210, XN220, XN300

Xcelite XNB201, Chisel Blade for Rough Shaping De-burring and Chiseling.

Check price now

Steck Manufacturing 21835 Door Hinge "Pin Popper"

Steck Manufacturing 21835 Door Hinge "Pin Popper" Review

See more picture

Steck Manufacturing 21835 Door Hinge "Pin Popper" Feature

• Removes door hinge pins fast
• Drives out even stubborn hinge pins
• Direct impact
• Clearance for door panels
• Works on all GM cars with removable hinge pins

Replacing worn out hinge pins, bushings or removing the door from the car, use this tool to make the job fast and easy. This tool includes Pin Puller to remove loosened pins.

Check price now

WoodOwl 02804 7/16-Inch 18-Inch Spur Auger

WoodOwl 02804 7/16-Inch 18-Inch Spur Auger Review

See more picture

WoodOwl 02804 7/16-Inch 18-Inch Spur Auger Feature

• Precision grinding and heat-treat processes enable the end user to cut nails and other materials encountered in the work without damage to the cutting edge.
• Safer than other single-spur auger bits because the consistent hardening and concentricity along the length of the bit keeps it in line without forcing the user to compensate for "walk".
• 7/16" shank with the quick-change power groove makes for easy bit changeover.
• Perfectly concentric design, which is guaranteed through the tightly-controled heat-treat and hardening processes, means that the hole cut will be exactly true to the diameter of the bit.

The WoodOwl 7/16"-Diameter x 18"-Long Single Spur Power Auger Bit is the industry standard for fast boring of clean holes in wood and nail-embedded wood. Constructed of high-grade carbon steel, which is heat-treated and fully hardened, WoodOwl Auger Bits are stay sharp and hold up cut after cut.

Check price now

MK Diamond DX Bullnose and Shaping Machine Part #165168

MK Diamond DX Bullnose and Shaping Machine Part #165168 Review

See more picture

MK Diamond DX Bullnose and Shaping Machine Part #165168 Feature

• Motor: 115V 60Hz
• Amps: 18
• Horsepower: 2 HP Drive Motor
• Arbor RPM: 2125
• Arbor: 5/8"

The MKDX makes fabricating tile and stone on the job site easy and precise. You can rough shape and polish, bevel and bullnose finishes on material up to 14". Its a powerhouse with a 2 HP motor, great for marble, porcelain or granite tile. Engineered for the professional, it establishes new standards in jobsite performance and design.

Check price now

Irwin Tools 1768772 Marples M500 Metal Strike Cap All Purpose Chisel 1/4"

Irwin Tools 1768772 Marples M500 Metal Strike Cap All Purpose Chisel 1/4" Review

See more picture

Irwin Tools 1768772 Marples M500 Metal Strike Cap All Purpose Chisel 1/4" Feature

• Solid one piece forged blade ensures structural integrity and the blade comes Sharpened and ready for use
• ProTouch Grip for comfort, reduced fatigue, and better grip
• Impact Resistant Polypropylene Core Handle
• Blade hardened and tempered - resulting in an edge that is slow to blunt yet easy to sharpen
• Strike Cap for use with hammer

"ProTouch" handles for increased comfort; steel strike cap for use with hammers; solid-forged chrome vanadium steel blade for maximum edge retention.

Check price now

King Arthur Tools Lancelot Woodcarving Disc, 22 Teeth, 7/8" Arbor

King Arthur Tools Lancelot Woodcarving Disc, 22 Teeth, 7/8" Arbor Review

See more picture

King Arthur Tools Lancelot Woodcarving Disc, 22 Teeth, 7/8" Arbor Feature

• Speed
• Power
• Chain Saw Blade
• 4" Diameter
• Max. 14,000 RPM

Lancelot Woodcarving Discs take the muscle work out of woodcarving with their speed, power and maneuverability. The secret is in the special chain saw blade which is securely held between two stainless steel plates. Mount the 4" dia. Lancelot in your 4" or 4-1/2" angle grinder and watch the chips fly! It easily cuts the hardest woods regardless of grain or knots. The 14-tooth model is great for "roughing out" the 22-tooth model and leaves a smoother "finished" surface. Teeth can be re-sharpened using a standard chain saw file. Maximum 14,000 RPM. Chains can not be interchanged between models. Squire Mini Woodcarving Discs can be attached to another disc for the ultimate in power carving! It can be used alone as a small carving disc by attaching the 3-3/8" dia. Squire to a Lancelot Disc with the Universal Mounting Nut. You can effectively double your cutting capacity. You not only remove waste material faster but curved work, like the inside of bowls, is easier and smoother than when using a single disc. Fits all mini grinders with 5/8" x 11 TPI arbors.

Check price now

Nozzle Carbide 5/64" SHAPING

Nozzle Carbide 5/64" SHAPING Review

See more picture

Nozzle Carbide 5/64" SHAPING Feature

• Cap style carbide nozzle.
• Will outlast ceramic 10 to 1.
• Sandblasting Nozzle

The nozzle is built right into the cap forming a single unit insuring a proper fit between hose and holder.

Check price now

Dremel 692 6-Piece Router Bit Set

Dremel 692 6-Piece Router Bit Set Review

See more picture

Dremel 692 6-Piece Router Bit Set Feature

• Rout, edge, inlay, and mortise in wood
• Constructed of high-speed steel
• Reusable plastic storage case included
• Ideal for a wide range of hobby, repair, and renovation jobs
• Do not run in excess of 30,000 RPM

A valuable addition to any woodworker's Dremel rotary tool, the Dremel 692 6-Piece Router Bit Set includes six high-speed router bits made from high-grade steel. Conveniently packaged in a reusable plastic case, these bits are ideal for routing, inlaying, and mortising wood and other soft materials. Ideal for a wide range of light to medium hobby, repair, and renovation jobs, this set ensures that you have the exact bit you need to tackle your next project.

The Dremel 692 6-Piece Router Bit Set includes: 612 piloted beading router bit 615 corner rounding router bit 650 1/8-inch straight router bit 654 1/4-inch straight router bit 617 core box router bit 618 chamfer router bit

For hobby, repair, and renovation jobs, the versatile bits can route, inlay, and more.

High-Speed, Durable Steel Construction to Tackle a Range of Jobs
Made of high-speed, durable steel, these bits are the ideal size for rotary tools. The straight bits offer exceptional versatility, and the piloted edge bits help you add a personalized, detailed touch to wood frames, molding, and more.

All six router bits are forged from high-grade steel and packaged in a reusable plastic case.View larger.

Quality Construction for Precise Cuts the First Time
Designed for use with the 335 Plunge Router and 231 Shaper/Router attachments, these bits feature high-quality construction that allows you to make exceptionally precise cuts the first time, saving you energy and stress. They're also well-suited for detailed work, such as building and sanding dollhouse furniture, model trains, or miniature buildings and planes.

User-Friendly Design and Easy Insertion Process for Longer Life
Incredibly easy to use, these bits work best when inserted all the way into the tool and then backed out slightly before tightening down. This insertion process provides plenty of shank for the collet or chuck to hold the bit in place. For optimum precision and longer life, it's also important to secure objects to a stable surface while working--if chattering occurs, simply increase the speed. It is also important to keep a light touch so the speed of the tool, not the strength of your arm, does the work.

Variety of Bits for a Range of Projects
This set comes with a total of six bits, including a 3/32-inch piloted beading bit, 1/4-inch core box bit, and 1/2-inch chamfer bit that all work well for inlaying and mortising wood and other soft materials.

About Dremel: A History of Brilliance and Innovation
Founded in 1932 in Racine, Wisconsin, Dremel is the industry leader in rotary tools. The company owes its success to the inventive genius of its founder and namesake, Albert J. Dremel. In his lifetime, Mr. Dremel owned 55 patents on a wide range of products from electric erasers to a gas-powered rotary lawn mower. His most famous and important invention was a high-speed rotary tool, dubbed the Dremel Moto-Tool. Compact, lightweight, and perfect for a wide range of jobs, the rotary tool was an immediate hit with hobbyists and eventually became accepted as one of the greatest inventions of the 20th century. Today, the Dremel name remains synonymous with utility, durability, and innovation.

What's in the Box
One 612 piloted beading router bit, one 615 corner rounding router bit, one 650 1/8-inch straight router bit, one 654 1/4-inch straight router bit, one 617 core box router bit, and one 618 chamfer router bit

Check price now

4" Vacuum Brazed Diamond Grinding Wheels/Shaping Wheels for Natural and Engineered stone

4" Vacuum Brazed Diamond Grinding Wheels/Shaping Wheels for Natural and Engineered stone Review

See more picture

4" Vacuum Brazed Diamond Grinding Wheels/Shaping Wheels for Natural and Engineered stone Feature

• 4" diameter, grit size 30/40;
• Most common 5/8"-11 arbor;
• Vacuum Brazed Technology;
• Lightweight grinding or cutting;
• Aggressive and long lasting.

DAMO Flat Grinding Wheels are designed for lightweight grinding and shaping work on marbles, granites and engineered stones. They can also be used for cutting application. Utilizing the "Vacuum Brazed Technology", they provide fast stock removal with little or no operator fatigue. They are versatile and long lasting. Available in 4" with a coarse grit, DAMO Flat Grinding Wheels fit on most common angle grinders and wet polishers with 5/8"-11 threaded spindles. They can be used wet or dry.

You may buy seperately our adapter 5/8"-11 to M14 to use with power tools with M14 thread spindle.

Check price now

Norton Grinding Wheel - 5in. Dia, Flaring Cup

Norton Grinding Wheel - 5in. Dia, Flaring Cup Review

See more picture

Norton Grinding Wheel - 5in. Dia, Flaring Cup Feature

• Aluminum Oxide

For fast, heavy duty grinding. 5/8 in.-11 thread fits all right angle grinders. Wheel dimensions are working diameter x backing plate diameter x thickness. Wheels (qty.): 1, Wheel Diameter (in.): 3 3/4 to 5, Wheel Thickness (in.): 2, Arbor Size (in.): 5/8, Thread Size: 11, Max. RPM: 7,260, Recommended Use: Metal

Check price now

Rockwell RW9126 Sonicrafter 2-1/2-Inch Carbide Grit Segment saw blade, Thin, 1-Piece

Rockwell RW9126 Sonicrafter 2-1/2-Inch Carbide Grit Segment saw blade, Thin, 1-Piece Review

See more picture

Rockwell RW9126 Sonicrafter 2-1/2-Inch Carbide Grit Segment saw blade, Thin, 1-Piece Feature

• 2-1/2-Inch, Thin

For removing grout, cutting and shaping plaster, porous concrete and
masonry. Thin, narrow profile blade is flat on one side to cut into corners and flush against adjacent surfaces.

Check price now

Paws Off Tools MB-006 24-Grit Eliminator Masonry Blade

Paws Off Tools MB-006 24-Grit Eliminator Masonry Blade Review

See more picture

Paws Off Tools MB-006 24-Grit Eliminator Masonry Blade Feature

• Solid surface for shaping and sanding
• Clean out corners installing windows in concrete
• Level up spots in tight areas
• Works great for installing plumbing fixtures and electrical boxes
• Universal insertion key fits into brand name reciprocating saws as easily as a blade

Masonry blade allows user to cut or shave cement, brick, rock, composites, foam, and more with a reciprocating saw. Crafted with high-grade durable steel coated with tungsten carbide grit. Universal insertion key fits all brand name reciprocating saws. No. MB-006: 24 grit No. MB-060: 60 grit

Check price now

WoodOwl 05206 2 9/16-Inch Bit with 7/16-Inch Shank Selfeed Bit

WoodOwl 05206 2 9/16-Inch Bit with 7/16-Inch Shank Selfeed Bit Review

See more picture

WoodOwl 05206 2 9/16-Inch Bit with 7/16-Inch Shank Selfeed Bit Feature

• Speed of use with a self-feed design and precisely ground cutting edges that guide the bit into the work, minimizing end user force and torque.
• Long bit life without the need for frequent resharpening ensured by tightly controlled heat-treat and hardening processes.
• Quick-change 7/16ö hex shank for fast bit change-out with secure gripping surfaces in the drill chuck.
• Perfectly concentric design that elimintes bit "run out" and ensures a dimensionally correct hole.

WoodOwl's 2-9/16"-Diameter Self-Feed Wood Boring Bit is designed with precise, hardened cutting edges that hold up cut after cut. Combined with an aggessive threaded lead screw that helps draw the bit into the work, the WoodOwl Self-Feed Bit offers maximum cutting ability with minimum fatigue.

Check price now